New renderer Philips 55OLED805/12
Re: New renderer Philips 55OLED805/12
Hmm ok, we just have to keep experimenting to find a transcoded format the TV will accept. I can't see anything in the logs that would make it not work - FFmpeg is starting correctly and I can see it transcoding.
The TV also tells us it supports the format we are offering, but it is normal for renderers to not be accurate about that.
Can you try changing the line with TranscodeVideo to the following values:
MPEGPS-MPEG2-AC3
MPEGTS-MPEG2-AC3
WMV
(one test per value)
The TV also tells us it supports the format we are offering, but it is normal for renderers to not be accurate about that.
Can you try changing the line with TranscodeVideo to the following values:
MPEGPS-MPEG2-AC3
MPEGTS-MPEG2-AC3
WMV
(one test per value)
Re: New renderer Philips 55OLED805/12
Still nothing.
I've tried these 3 options.
Tried FFmpeg. Mencoder, TsMuxer and VLC.
On Tv there was "loading" circle...I have been waiting for 2 minutes for each engine but nothing run.
Logs in the attachment.
P.S. I installed Kodi app on my TV and run it. Picked UMS as a source of files and looked for Transcode folder. Tried to run the file from there but with no success. Even Kodi can't play these files- which is strange because UMS says that file is playing....
I've tried these 3 options.
Tried FFmpeg. Mencoder, TsMuxer and VLC.
On Tv there was "loading" circle...I have been waiting for 2 minutes for each engine but nothing run.
Logs in the attachment.
P.S. I installed Kodi app on my TV and run it. Picked UMS as a source of files and looked for Transcode folder. Tried to run the file from there but with no success. Even Kodi can't play these files- which is strange because UMS says that file is playing....
- Attachments
-
- ums_dbg_2021-08-27-14-39-WMV.zip
- (262.3 KiB) Downloaded 844 times
-
- ums_dbg_2021-08-27-14-29-TS.zip
- (192.69 KiB) Downloaded 835 times
-
- ums_dbg_2021-08-27-14-20.-PS.zip
- (159.61 KiB) Downloaded 834 times
Re: New renderer Philips 55OLED805/12
Thanks for the logs. Let's focus on testing with MPEGPS-MPEG2-AC3, at least at first, since that is generally the most widely supported format (it's the same as DVDs)
This is what we sent to your TV about that file:
One possible reason the TV doesn't like it is that "DLNA.ORG_OP=01" part. We can try sending different values for it, and also send no value.
The TV has told us it supports a couple of close profiles:
So we can try to match those.
First can you please try these two separately with MPEGPS-MPEG2-AC3:
If they both don't work I will make some custom UMS builds
This is what we sent to your TV about that file:
Code: Select all
<res xmlns:dlna="urn:schemas-dlna-org:metadata-1-0/" bitrate="286223" colorDepth="8" duration="0:51:56.576" framerate="25p" nrAudioChannels="6" protocolInfo="http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_PAL;DLNA.ORG_OP=01" resolution="1920x1080" sampleFrequency="48000">http://192.168.30.247:5001/get/359/black.mirror.s04e04-final.mkv_transcoded_to.mpg</res>
The TV has told us it supports a couple of close profiles:
Code: Select all
http-get:*:video/mpeg:DLNA.ORG_PN=MPEG_PS_PAL;DLNA.ORG_FLAGS=8d700000000000000000000000000000
http-get:*:video/mpeg:*
First can you please try these two separately with MPEGPS-MPEG2-AC3:
Code: Select all
SeekByTime = true
SeekByTime = exclusive
Re: New renderer Philips 55OLED805/12
Hi,
Still nothing.
I don't know if it is important, but manual says that Philips OLED805 supports only DLNA ver.1.5
Also, which renderer config should I use? I tested with the last one you've sent me and changed parameters to:
and as a second test switched exclusive to true.
Logs in the attachment.
P.S. Is it possible that TV needs more time than 2 minutes (after which I stopped), to read these transcoded files?
Still nothing.
I don't know if it is important, but manual says that Philips OLED805 supports only DLNA ver.1.5
Also, which renderer config should I use? I tested with the last one you've sent me and changed parameters to:
Code: Select all
TranscodeVideo = MPEGPS-MPEG2-AC3
TranscodeAudio = MP3
SeekByTime = exclusive
Logs in the attachment.
P.S. Is it possible that TV needs more time than 2 minutes (after which I stopped), to read these transcoded files?
- Attachments
-
- ums_dbg_2021-08-29-08-36-trye.zip
- (114.37 KiB) Downloaded 799 times
-
- ums_dbg_2021-08-29-08-51-ex.zip
- (118.42 KiB) Downloaded 853 times
Re: New renderer Philips 55OLED805/12
I doubt it would take longer than 2 minutes, it would usually take around 1 second and I can see your computer is keeping up with the transcoding. I'll make a test build for you as soon as possible, which may need to be later in the week
Re: New renderer Philips 55OLED805/12
Great! Thanks for the effort. Appreciate it. ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: New renderer Philips 55OLED805/12
Here's the first build to test, fingers crossed! https://www.universalmediaserver.com/up ... 38b3d5.exe
Re: New renderer Philips 55OLED805/12
Nothing ![Sad :(](./images/smilies/icon_e_sad.gif)
I am starting to think, that cause of the thing is transcoding has being blocked by the manufacturer of tv.
![Sad :(](./images/smilies/icon_e_sad.gif)
I am starting to think, that cause of the thing is transcoding has being blocked by the manufacturer of tv.
- Attachments
-
- ums_dbg_2021-09-02-10-08.zip
- (294.51 KiB) Downloaded 829 times
Re: New renderer Philips 55OLED805/12
I think we can figure this out ![Smile :)](./images/smilies/icon_e_smile.gif)
Can you try adding this to Philips-OLED.conf
![Smile :)](./images/smilies/icon_e_smile.gif)
Can you try adding this to Philips-OLED.conf
Code: Select all
SendDLNAOrgFlags = false
Re: New renderer Philips 55OLED805/12
No luck ![Sad :(](./images/smilies/icon_e_sad.gif)
![Sad :(](./images/smilies/icon_e_sad.gif)
- Attachments
-
- ums_dbg_2021-09-03-09-32.zip
- (798.64 KiB) Downloaded 827 times